Kitchens and laundries
Kitchen and laundry renovations, fitted by a carpenter
New cabinetry, benchtops and splashbacks, or a whole new layout, in Warana and across the Sunshine Coast. Licensed for kitchen and laundry installation and joinery, so the cabinets go in square, level and tight to the wall.
Drag to compare. More jobs
Kitchens
A kitchen renovation, start to finish
A kitchen is cabinetry first: if the carcasses aren’t level, nothing on top of them will be. That’s why it pays to have a carpenter fit it.
- The old kitchen removed and the rubbish taken away
- Walls patched and sheeted, and framing fixed where the old cupboards hung
- Sink, cooktop and power moved if the new layout needs it, by licensed trades
- Cabinets set dead level, fixed, and scribed to walls that aren’t quite straight
- Benchtops measured off the finished cabinets, so they fit exactly
- Splashback, sink, tapware and appliances fitted, doors and drawers adjusted
How a kitchen comes together
From a measured wall to a finished kitchen
Scroll down: the same wall, from the first tape measure to the lights coming on.
Measured
The wall, the window, the ceiling height and where the water and power come in. Old houses are rarely square, so this is where the job is won.
Planned
The new kitchen is planned to those measurements: every cabinet, the fridge space, the oven tower and the bench height, all worked out before anything is ordered.
Cabinets in
The carcasses go in, set level along their whole length and fixed to the wall, scribed where the wall wanders.
Fitted
The benchtop goes on, measured off the cabinets themselves, then the doors, drawers, splashback, sink and appliances.
Finished
Doors and drawers adjusted so the gaps run even, the lights on, the room cleaned. Then it’s yours to cook in.
Benchtops
Choosing a benchtop
The benchtop sets the look and takes the wear. Here’s how the usual choices compare.
Laminate
The most affordable, in hundreds of colours and stone or timber looks. Keep hot pans off it.
Timber
Warm and repairable: a scratch sands out. It needs oiling now and then, and a careful eye around the sink.
Natural stone
Granite or marble, each slab one of a kind. Heavy, hard-wearing and made to measure off the cabinets.
Porcelain
Thin, very hard and heat-resistant, with convincing stone looks. Also made to measure once the cabinets are in.
Engineered stone benchtops have been banned in Australia since 1 July 2024, because cutting them releases silica dust. The choices above are the ones on offer now.
Laundries
Laundry renovations that make room
A laundry works hard in a small space. Using the height, and putting a bench where the basket used to sit, makes all the difference.
- A benchtop over front-loading machines, for folding
- Cupboards above and below, and a tall cupboard for the mop and ironing board
- An inset tub in the bench instead of one on legs
- A tiled splashback and floor, waterproofed where the water is
- A hanging rail for the shirts that can’t go in the dryer
Questions
Kitchen and laundry questions
How much does a kitchen renovation cost on the Sunshine Coast?
It depends most on the size, the benchtop and whether the sink or cooktop moves. The cost guide gives a ballpark, and the quote after a measure-up is free.
Can you change the doors and benchtop and keep my cabinets?
If the cabinets are sound and level, often yes. New doors, a new benchtop and a splashback on the carcasses you have is a kitchen refresh, and costs much less than starting again.
Why does a stone benchtop take longer?
Stone and porcelain tops are measured off the cabinets once they’re installed, then made to that measure. That gap in the middle of the job is normal, and it’s why they fit so well.
Can my laundry go in a cupboard?
Often it can. A European-style laundry behind doors, with the machines stacked or under a bench, suits plenty of homes. It needs the water, waste and power in the right place, which is worked out at the measure-up.
Tell us about your kitchen or laundry
Call 0468 511 068 for a free quote, Monday to Friday, 9 am to 5 pm.